Spokes shape wiring diagram

[Red Lily Way Christmas]

I have this EFL Spinner 24.  No model in LOR or XLIGHTS.  So I define it as a spoke with 28 arms with 7 nodes on each.  The motion effects with this work great as I can easily create in/out motion on the 'rings'.  However, the wiring diagram does not make sense as it does not lay out the wiring by nodes (only by each spoke).  So what is the correct wiring for for this prop?

[dibblejr]

 Most prop manufacturers are creating their props for a DMX / e1.31 environment/ controllers. 

If you are using their prop and not using DMX/ e1.31 controllers you have to get creative and use your controller such as the LOR Pixie controllers to their ability and create the wiring layout in the "Custom" placement grid.

You must wire it on the prop the same way you wire it in prop def. 

The majority of my props are all custom. Once you make a couple you will get good add it.

JR

[Jimehc]

Either Create a "Custom" Prop or try "Circles Nested"

[Red Lily Way Christmas]

Circles Nested works and has a wiring diagram that I understood.  Thanks for the help.