shg Posted November 20, 2008 Share Posted November 20, 2008 I am using 64 channels when I am naming each channel and applying a color I see a drop down for device type do I need to name each of my channels with a device type then on network do I put regular?Then I assume unit 1 would be 1-16 then would unit 2 be 1- 16 also or would it be 17 -32 and so forth? i only had 16 channels last year and dont remeber doing that to all my channels Just a little brain fart I guess LOL:shock: Link to comment Share on other sites More sharing options...
cmoore60 Posted November 20, 2008 Share Posted November 20, 2008 What version of the software are you using.Basically you will define device type as LOR controller, then you will assign a unit and then the channel on that unit. You will have a 1-16 for EACH controller, or if an 8 channel controller 1-8.Chuck Link to comment Share on other sites More sharing options...
rwertz Posted November 20, 2008 Share Posted November 20, 2008 shg wrote: i only had 16 channels last year and dont remeber doing that to all my channelsUnder certain conditions when you assign a channel to a controller the software will ask if you want to “autopopulate” the remaining circuits for that controller. Link to comment Share on other sites More sharing options...
shg Posted November 20, 2008 Author Share Posted November 20, 2008 I am using LOR II so then unit 2 would be 1-16 also, not 17-32 ,and unit 3 would be 1- 16 also they are all 16 channel controllers Link to comment Share on other sites More sharing options...
iresq Posted November 20, 2008 Share Posted November 20, 2008 Remember, after configuring your sequence (including the animation), export the configuration. Then import the configuration for subsequent sequences. That way you don't have to make your assignments every time. Link to comment Share on other sites More sharing options...
Recommended Posts