Jimehc Posted October 5, 2021 Share Posted October 5, 2021 (edited) I have been using this little meter (inline) when testing my custom built Pixel Controllers and Pixels... It displays > Amps / Watts / Voltage < I simply attached Pigtails to the Meter and connect between Controller + Pixels.. Amazingly, I found that my Bullet Pixel strings draw more the my C9 Bulb strings https://www.amazon.com/dp/B079JVGRSL?psc=1&ref=ppx_yo2_dt_b_product_details Edited October 5, 2021 by Jimehc Link to comment Share on other sites More sharing options...
PhilMassey Posted October 5, 2021 Share Posted October 5, 2021 Wouldn't it be easier to measure the current across the board fuse holder with a multimeter. No rewiring required. 1 Link to comment Share on other sites More sharing options...
Jimehc Posted October 5, 2021 Author Share Posted October 5, 2021 (edited) That is another way of doing it... I just added Pigtails to the Meter - No Rewiring and No need to mess around with the board... Edited October 5, 2021 by Jimehc Link to comment Share on other sites More sharing options...
Recommended Posts