Dr. Cable Posted November 25, 2019 Share Posted November 25, 2019 I'm new at this, I'm hoping for any help, I would like to creat a prop with multiple lights on 1 circuit but when running the play view I get a conflict with the circuit. I have 1 unit w/16 ch. But would like to put a few lights on each channel and view them on the display playback view. I'm running the latest S5 Thank you for your time. Link to comment Share on other sites More sharing options...
TexasLights Posted November 25, 2019 Share Posted November 25, 2019 in the prop settings, select uses same channel as and select one as the primary. This is referred to as the master prop. The others are tied to it and will light at the same time. Link to comment Share on other sites More sharing options...
tlogan Posted November 25, 2019 Share Posted November 25, 2019 or depending in the location of the additional lights in your layout, you can add a triple plug cube to the outlet dangle of the channel and run an extension cord to the other additional lights. No additional programming required. This might get you going sooner for this year rather than trying to figure out the S5 software to do what you want. Link to comment Share on other sites More sharing options...
Dr. Cable Posted November 25, 2019 Author Share Posted November 25, 2019 Thank you for your time, they both worked. I spent 2 night trouble shooting this and it was as easy just asking for help. Link to comment Share on other sites More sharing options...
Recommended Posts