Sequencer files don´t send signals to the controllers

[Sandmann]

Hi,

I´ve updated S4 to S5. After a few tries, i had my old preview on it. 

Today i start a try with complete setup. Hardware-utility running without problems. All lights can be controlled.

If i started playind the sequenze, nothing happens... all lights stay dark.

I allready checked networksetting / unit ID / circuits ect.. 

What am I doing wrong?

Prop Definition for example :

Name: Spot 1   Dimming curve: none  Type: channel per color/white  Shape: Bulbs #1  LOR: max16  Enter channel on first row   1: Regular / 03 / 9 / 9 / white

Thx for your suggestions and advice.

[debtoews]

Make sure CONTROLS LIGHTS is checked in sequencer

[Sandmann]

Where can i find this point (controls lights)

[Sandmann]

Ok got it, thanks. I will start a new try tomorrow.

[Sandmann]

Ok Light are working, but the CCC II / Pixie won´t run.

Items cannot be played because they are on an network that is not enhanced.

Prop: CCC04.Port 01 (50x1)

Prop: CCC04.Port 02 (50x1)

Prop: CCC06.Port 01 (50x1)

Prop: CCC06.Port 02 (50x1)

Every Controller is on the regular LOR network.

@ HU everithing works.

Thanks for your help.

 

[k6ccc]

Sounds like you have sequenced your pixels with either Motion Effects or SuperStar Effects.  Those then MUST be played to lights on an Enhanced  Network.