Guest guest Posted November 25, 2005 Share Posted November 25, 2005 Hi,There is new firmware available for the CTBxxD cards and the LORxxxW controllers. This should take care of problems with Twinkle where lights were "stuck" on or off.You can get the firmware at http://www.lightorama.com ... Look under the "Support" tab.Thanks, Link to comment Share on other sites More sharing options...
Guest guest Posted November 28, 2005 Share Posted November 28, 2005 Ok...so how do we apply the upgrade? Do we just save the firmware file in the LOR folder? Do we have to select something when loading up the sequence editor? Sorry, there's just no instructions on it and I don't want to blow up my controllers by doing it wrong. Link to comment Share on other sites More sharing options...
Guest guest Posted November 28, 2005 Share Posted November 28, 2005 Larry,Save the file on the PC, and go into the hardware utility. Click the Firmware button at the bottom of the page. I am not sure if you need to do this for each controller. Link to comment Share on other sites More sharing options...
Guest guest Posted November 28, 2005 Share Posted November 28, 2005 Yes save it on the PC. You may as well put it in the Light-O-Rama/firmware folder...With the hardware utility you sould follows the three steps in the firmware section.Select the unit you want to update in the refresh list at the top.Step 1: click the button ( Selected from units listed above)Step 2: Select the firmware fileStep 3: Click downloadThere is some help on Firmware in the LOR help file. If you search on firmware you will find a description.... It does not cover downloading new versions from online and what to do with those version. Link to comment Share on other sites More sharing options...
Recommended Posts