SnappyTom Posted November 29, 2018 Share Posted November 29, 2018 I need to change the Network and Control #s to an existing sequence in SE. Do I have to change them individually (like 600 times) or is there a way to change one hole ribbon at a time? Link to comment Share on other sites More sharing options...
dibblejr Posted November 29, 2018 Share Posted November 29, 2018 Do you have a Master Config? If so you can import. Id not you can export one from your current config that works and import it to the new. Depending on what changes were made it may save you a ton of time JR Link to comment Share on other sites More sharing options...
SnappyTom Posted November 29, 2018 Author Share Posted November 29, 2018 Ok, I'll try that. thanks Link to comment Share on other sites More sharing options...
dibblejr Posted November 29, 2018 Share Posted November 29, 2018 Once you make the changes I’d suggest that you make a Master Config. Also there is a Network Config as well within NP- it may come in handy someday. JR Link to comment Share on other sites More sharing options...
SnappyTom Posted November 29, 2018 Author Share Posted November 29, 2018 Haven't messed with CCRll much. So it worked like the none CCR sequences do. Thanks that worked great. Link to comment Share on other sites More sharing options...
Recommended Posts