Pineview lights Posted December 3, 2017 Share Posted December 3, 2017 On one of my sequences it will not play all the way through all the other work fine just one is not it plays for about 30 seconds and then stops Link to comment Share on other sites More sharing options...
Don Posted December 3, 2017 Share Posted December 3, 2017 Since you don't mention if you are running from the computer or MP3 director, etc ... Reformat the SD card. Build the shows with the hardware utility. Check the error logs. Run the LOR verifier program. Make sure you use the right SD card. Create a show with just that song in it. Link to comment Share on other sites More sharing options...
Pineview lights Posted December 3, 2017 Author Share Posted December 3, 2017 My apologies I am running it off an sd card after using simple show builder to build my show and playing it from the MP3 director Link to comment Share on other sites More sharing options...
Don Posted December 3, 2017 Share Posted December 3, 2017 Always the same song? If so, then try a test without that sequence in there. Also, try a test with just that sequence there. Link to comment Share on other sites More sharing options...
Pineview lights Posted December 3, 2017 Author Share Posted December 3, 2017 Yes just that song. It did the same thing when I tried running it by it self on MP3 director, when I played show without it I had no problems. Then I tried running show from PC and that song worked fine it just won't play right on the MP3 director it plays for about the first 15-20 seconds and stops and then continues to next sequence. Link to comment Share on other sites More sharing options...
Pineview lights Posted December 3, 2017 Author Share Posted December 3, 2017 Update: I built it on hardware utility just that song and it played fine on the MP3 director so why won't it work through simple show builder Link to comment Share on other sites More sharing options...
Recommended Posts