A one doll Posted November 27, 2017 Share Posted November 27, 2017 I have 7 boxes I am using with a mini director this is my first time with light o Rama do all the boxes have to be on a timer? Thanks Link to comment Share on other sites More sharing options...
Don Posted November 27, 2017 Share Posted November 27, 2017 The mini-director will control all 7 boxes. It will also pull power from powered on LOR controllers. Check the documentation on how to bypass this. You could then use an external power supply (Again, in docs) and put the mini director on a timer. Link to comment Share on other sites More sharing options...
jtomason Posted November 28, 2017 Share Posted November 28, 2017 When I used the MD I had the controllers on a timer. When the controllers powered up, so did the MD, and the show started immediately. Link to comment Share on other sites More sharing options...
Mega Arch Posted November 28, 2017 Share Posted November 28, 2017 3 minutes ago, jtomason said: When I used the MD I had the controllers on a timer. When the controllers powered up, so did the MD, and the show started immediately. I still do it this way. I have 9 circuits all fed from the same 40 amp timer. Being 95 % LED, entire show is less than 20 amps. So "be like Joe"... Link to comment Share on other sites More sharing options...
Recommended Posts