cdlouke Posted November 23, 2017 Share Posted November 23, 2017 My brain is about to explode and I know it is something simple I am over looking. I decided that I would run my Pixels on an AUX this year. So I set up my 3 CTB16's on com 3 as units 1, 2, and 3. I set my pixie16 as AUX 4 and 50 watt floods as AUX 5 and 6. I can get either the CTB16's or the pixels to work but neither together. Thanks for any help you can give me Link to comment Share on other sites More sharing options...
Dennis Laff Posted November 23, 2017 Share Posted November 23, 2017 when you set up aux networks it asks if this network will run show say no, your reg network will Link to comment Share on other sites More sharing options...
k6ccc Posted November 23, 2017 Share Posted November 23, 2017 Your description does not quite work. Your Pixie 16 will use 16 IDs starting at the ID you specified - in your case I assume meant ID 04 on the AuxA network. If that is the case, then your Pixie 16 will use IDs 04, 05, 06, 07, 08, 09, 0A, 0B, 0C, 0D, 0E, 0F, 10, 11, 12, & 13 (remember it counts in hex). Therefore you would need to use different IDs for your floods. Have you plugged in a second USB to RS-485 adapter into your computer, and set which comm port it is in Network Preferences configuration? Link to comment Share on other sites More sharing options...
k6ccc Posted November 23, 2017 Share Posted November 23, 2017 If that did not make sense, PM me a phone number and I’ll call you. Link to comment Share on other sites More sharing options...
Recommended Posts