Soulz Posted October 21, 2017 Share Posted October 21, 2017 I am looking for someone with LOR software and doing some troubleshooting on a couple of sequences on my 16 string Mega Pixel Tree. Specifically, I have a DMX tree that I purchased from holidaycoro. I have set up the tree and it works fine with a couple of sequences I purchased through them, however here are my problems. **My sequence for Thriller plays upside down. **Monster Mash only uses 6 of the 16 strips, but on the LOR SE it shows it is written for 16 strings. **I can make LOR PE effects but don't understand how to play them on the tree and would like to use these for intermissions. Like many of you, I have a busy professional/family life and need some help from someone with experience. I have a Go to Assist account to help us connect. After reading this if you feel you are qualified to help I would like to offer $125 an hour for your help. I will pay a 1-hour minimum regardless of how long it takes. You can call or text me at 850-284-6811 Thank you, Carl Link to comment Share on other sites More sharing options...
Recommended Posts