mmais68569 Posted September 29, 2017 Share Posted September 29, 2017 I have been using LOR on my show computer for about 9 years now. Finally the old girl died this summer & I am in the process of setting up a new laptop to run the show. I know I have missed something so help me out. Below is what I have done so far. 1. installed LOR V4.3.18 with super star advanced. 2.moved sequences files & audio files to correct folders on new computer. I will be using a Lynx DMX wireless transmitter to send show to controllers. I have used this setup for the last 4-5 years with no problem. What I do remember & do not remember where it is located is I needed to go into LOR & change a setting to get this to work. Also this year I have added an E1.31 controller to run RGB Pixels. The controller has been installed & recognized by the show computer do I need to do anything else so it works. I do have a cat5 cable for the E1.31 controller. Like I said earlier I know I have missed something to get show to run with no problems. It would have been easier if I was able to get into the old computer. Thanks Mike Link to comment Share on other sites More sharing options...
Recommended Posts