Fletch Posted September 17, 2017 Share Posted September 17, 2017 Hey guys setting up my 1st display (total newbie) I have been doing my homework since last year reading all I can about lor networks and how to get started. I have purchased the tso signature series package to get me going and I will be launching a 52 channel display this year to get me going....my question is I would like to put an intro sequence at the beginning of my show can I purchase one from light o Rama and add it to my tso package at the beginning of my show and if so how thanks for the help guys cheers Link to comment Share on other sites More sharing options...
Speedster Posted September 29, 2017 Share Posted September 29, 2017 Intro sequences can be purchased here: http://sequences.lightorama.com/introduction-sequences To add it to the beginning of your show, you'll have to install the software by running the .exe file that's on the TSO SD card. Then you can build your own show on another SD card with or without the 60 seconds of silence between sequences and in any song order you want. You would obviously put the Intro sequence first. Use the Hardware Utility LOR-MP3 tab to do all this: http://www.lightorama.com/help/index.html?light-o-rama_mp3_directors.htm If you decide to do this, make sure you use an SD card from Kingston Technology (4 - 32 GB, SDHC Class 4 or higher) because their cards are rated to work at -20 degrees. LOR Help Desk does not recommend SanDisk cards due to problems that LOR users reported with them. Link to comment Share on other sites More sharing options...
Recommended Posts