Sujay Posted April 10, 2017 Posted April 10, 2017 I am very new to this. I am having issue creating network with pixie16 controller. should i be able to use cat6 cable from laptop connect to switch/router and router to controller? does controller get IP address from router via DHCP?
LOR Staff Posted April 10, 2017 Posted April 10, 2017 PixIE or PixCON? The PixIE is an RS485 device ONLY and does not connect to a hub/router or any other Ethernet connection. If you have connected the PixIE to ethernet, you may have either damaged the board or the Ethernet device. The PixCON on the other hand IS an Ethernet device. If you are having issues with that, there is a checklist posted here that will help you get the board configured.
Sujay Posted April 11, 2017 Author Posted April 11, 2017 Thank you. I didn't connect yet. Board is still working good. I was looking at wrong documentation .Sent from my SM-G930V using Tapatalk
Recommended Posts