brichi Posted January 3, 2017 Share Posted January 3, 2017 I can't figure this out for the life of me I have a pixie 4, 1 100 pixel 5M smart pixel strip to feed 2 separate arches off channel 1 of the pixie 4 How do i set this up in visualizer since it wont let me start at pixel "51", seems 50 is the max thanks! Link to comment Share on other sites More sharing options...
k6ccc Posted January 3, 2017 Share Posted January 3, 2017 As far as I know, this is a case of the software not being caught up with the hardware. I assume that a updated release of the LOR software will fix this issue. However, here is a work around so you can start sequencing until the update comes out. Add those as DMX pixels using the draw pixel string icon. Assign them a dummy DMX universe. That will allow you to import the visualization into Sequence Editor or Pixel Editor. After the software catches up, you can redraw the arch as LOR channels and delete the pixels based arch. Unfortunately you can't modify the pixel type within Visualizer. This will work importing into SuperStar if you do it right. I don't know if this works with Pixel Editor as I don't use it. Link to comment Share on other sites More sharing options...
brichi Posted January 3, 2017 Author Share Posted January 3, 2017 ill give it a shot, I use PE and SE so we shall see, thank you! Link to comment Share on other sites More sharing options...
SPaschall Posted January 4, 2017 Share Posted January 4, 2017 Are you setting this up in PE? If so then it can be done fairly easily. SPaschall 1 Link to comment Share on other sites More sharing options...
brichi Posted January 4, 2017 Author Share Posted January 4, 2017 (edited) i was trying in visualizer but can also do in PE if its easier and you know how. I liked the idea of doing it in Visualizer being i am mainly programming most likely in SE and then cleaning up to add effects in PE Edited January 4, 2017 by brichi Link to comment Share on other sites More sharing options...
SPaschall Posted January 4, 2017 Share Posted January 4, 2017 You will have to program it in either one or the other. At this moment you can't use both due to the intensity data files. SPaschall Link to comment Share on other sites More sharing options...
brichi Posted January 4, 2017 Author Share Posted January 4, 2017 I figured I could program all the things I want to do in SE and then open that file in PE and fill in the blank spaces I leave open for PE effects Link to comment Share on other sites More sharing options...
brichi Posted January 4, 2017 Author Share Posted January 4, 2017 I guess my other option is to buy another pixie4 and do 50 pixels per channel/arch instead of running 100 off 1 channel Link to comment Share on other sites More sharing options...
SPaschall Posted January 4, 2017 Share Posted January 4, 2017 Why when the one board would cover the one universe for the strip?SPaschallSent from my SCH-S968C using Tapatalk Link to comment Share on other sites More sharing options...
brichi Posted January 4, 2017 Author Share Posted January 4, 2017 cause I cant program them in visualizer pretty much, I cant setup the 8 arches in my house to program, the wife would love that, LOL Link to comment Share on other sites More sharing options...
scubanimal Posted January 5, 2017 Share Posted January 5, 2017 I have a Pixie4 card, I did it the way Jim (K6ccc) said to. Later I did created one in SS, and that ended up being my primary viz for sequencing. Then just exported it into SE. Again set up as DMX, export as legacy and then cut&paste into SE. Link to comment Share on other sites More sharing options...
brichi Posted January 5, 2017 Author Share Posted January 5, 2017 I don't see how to export as legacy, here is what I a doing, can you guys correct what I am doing wrong? 1. opening Visualizer 2. create a new blank start 800x800 3. click "Draw pixel string" 4. draw 2 arches in one sweep 5. double click, box comes up to name as prop and 100 pixels 6. click ok to recommended setting 7. wizard set to universe 1 pixel 1 export I don't see anything to make it legacy and is I open PE to try and import it looks for a .lee file but my export is a .lpf Link to comment Share on other sites More sharing options...
brichi Posted January 5, 2017 Author Share Posted January 5, 2017 I got it going in PE, just not SE so far. Link to comment Share on other sites More sharing options...
brichi Posted January 5, 2017 Author Share Posted January 5, 2017 On 1/3/2017 at 10:22 AM, k6ccc said: . Add those as DMX pixels using the draw pixel string icon. Assign them a dummy DMX universe. That will allow you to import the visualization into Sequence Editor Thanks, I got it working for PE but cant figure out how to import the visualization into SE On 1/3/2017 at 10:22 AM, k6ccc said: Link to comment Share on other sites More sharing options...
brichi Posted January 5, 2017 Author Share Posted January 5, 2017 actually in PE i can set it all but it wont control the lights, I'm definitely missing something (Control lights is on in PE, just not controlling being its DMX vs LOR I'm guessing) Link to comment Share on other sites More sharing options...
SPaschall Posted January 5, 2017 Share Posted January 5, 2017 Make sure your control panel is open and everything matches in the network settings. If you are using a high spees adaptor make sure you have it set for enhanced in the network settings. Sent from my SCH-S968C using Tapatalk Link to comment Share on other sites More sharing options...
brichi Posted January 5, 2017 Author Share Posted January 5, 2017 (edited) yeah thats set, it all works if i set normal LOR channels but making a DMX pixie string lights up in visualizer and PE but does not make the physical lights turn on. Im still not seeing where legacy is. you guys have a step by step on how you're setting up using DMX strings and then having them actually work on a LOR pixie4? The pixie is obviously set to LOR mode, not DMX Edited January 5, 2017 by brichi Link to comment Share on other sites More sharing options...
SPaschall Posted January 5, 2017 Share Posted January 5, 2017 Are you running it as e1.31?SPaschallSent from my SCH-S968C using Tapatalk Link to comment Share on other sites More sharing options...
brichi Posted January 5, 2017 Author Share Posted January 5, 2017 (edited) I'm using the LOR usb high speed adapter to ethernet to the pixie4 Edited January 5, 2017 by brichi Link to comment Share on other sites More sharing options...
SPaschall Posted January 5, 2017 Share Posted January 5, 2017 Is it set to enhanced in the network preferences? Sent from my SCH-S968C using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now