gstigall Posted December 20, 2016 Posted December 20, 2016 Hi guys, I am in desperate need of help. For some reason on each of my pixie 16s only the first 4 ports on each bank (1-4 and 16-14) are coming on. I have a 300W 60A power supply powering each one, which according to the documents should be fine since each card as two 30A banks. I have check the extension cords and they appear to be fine so not sure what is and am really desperate. So much so I only did a cursory glance through the forums to see if there was another thread covering this so I apologize if this is a repost.
LOR Staff Posted December 20, 2016 Posted December 20, 2016 Do the pixels work when you press the test button on the board?
gstigall Posted December 20, 2016 Author Posted December 20, 2016 Yes sir. That was a need trick so just a channel configuration issue? Sent from my SAMSUNG-SM-G925A using Tapatalk
gstigall Posted December 20, 2016 Author Posted December 20, 2016 Hi Mike, if it is channel configuration issue. I could use help there as well. I have set one controller to unit ID 16 one to 33 and one 49. On the controller with unit ID 16 I should have until ID 16 through 31 right? With port 1 being 16 and post 16 being 31 sequentially up the board or does it right to left? Dumb questions I know, alittle stressed so asking for clarity. Sent from my SAMSUNG-SM-G925A using Tapatalk
LOR Staff Posted December 20, 2016 Posted December 20, 2016 No. You will have: For 16 16,17,18,19,1A,1B,1C,1D,1E,1F,20,21,22,23,24,25 For 33 33,34,35,36,37,38,39,3A,3B,3C,3D,3E,3F,40,41,42 For 49 49,4A,4B,4C,4D,4E,4F,50,51,52,53,54,55,56,57,58 Hexadecimal. All the cool kids use it.
gstigall Posted December 20, 2016 Author Posted December 20, 2016 NO FLIPPIN WAY!!! Thank you very much that got it. I am sure that was said somewhere in the documentation and in my haste to get things working I looked over it. Again, thank you, Thank you, THANK YOU!!! I owe you a case of beer if you drink!! Sent from my SAMSUNG-SM-G925A using Tapatalk
Mega Arch Posted December 20, 2016 Posted December 20, 2016 1 hour ago, gstigall said: ...,,,I owe you a case of beer if you drink!!..., Very nice gesture. Send it to me & I'll get with devMike. ?? 1
gstigall Posted December 20, 2016 Author Posted December 20, 2016 Sounds like a plan Sent from my SAMSUNG-SM-G925A using Tapatalk
Mr. P Posted December 20, 2016 Posted December 20, 2016 10 minutes ago, Mega Arch said: Very nice gesture. Send it to me & I'll get with devMike. ?? And since gstigall is in my state if he sends it to me I will make sure it gets to Mega who can then get with Mike.
gstigall Posted December 20, 2016 Author Posted December 20, 2016 Depending on how close you Mr. P I may just bring you one. Just two Army guys and some beer. Perfect! Sent from my SAMSUNG-SM-G925A using Tapatalk
Recommended Posts