Tony2535 Posted December 10, 2016 Posted December 10, 2016 Hello I am a noobie also and having problems with sequence the lights do not come on for the sequence the little square at the bottom right is blue no other lor programs are running? The lights work on the setup program but not in sequencing program any help would be appreciated
basis21b Posted December 10, 2016 Posted December 10, 2016 If you can, provide a screen capture of what is displayed in the Sequence Editor when you click on Tools --> Channel Configuration . It should show how you have mapped the channels in your sequence to your controller(s).
Tony2535 Posted December 10, 2016 Author Posted December 10, 2016 it says unit 01.1 light o-rama controller network regular unit 01 circuit 1
Mr. P Posted December 10, 2016 Posted December 10, 2016 Make sure that the comm listener/control panel is running. There should be another LOR square open on the bottom lect of the task bar with a "CL" in it. Also ensure the "control Lights" is checked, Top menu "Play" then check "Control Lights." 1
Tony2535 Posted December 10, 2016 Author Posted December 10, 2016 thank you For your help I overlooked the unit was actually 02 not 01. Up and running now thank you for the insight
Recommended Posts