Easy way to add RGB Channels to excisting sequences

[brewers]

Is there any easy way to add channels to my excisting sequences before I edit in pixel editor?

[Mr. P]

It all depends on what you are wanting to add. If you just want to add a couple RGB channels then go to your last channel in SE and right click on that channel. Then you will click on Insert RGB Channels.

If you are wanting to add an LOR controller like a CMB24D then in SE right click on your last channel then click on Insert Device. Fill in the info in the pop-up box and it will add all the channels for you.

[brewers]

I have a pixie 8 and want to add the 8 id's with there 50 each

thought there might be an easier way to add 400 channels

[Mr. P]

If you install the new S4 beta software v4.3.16 it has support for the pixie so the pixie may show up in the "Insert Device" option and add the channels for you.

Can anyone who is running the beta 4.3.16 verify if the pixie has been added in the "Insert Device."

[brewers]

I had hoped so, but no, have to insert each channel.  Was hoping for something faster,

 

[Sully]

If you're going to do the pixel editing in PE then you don't need to add the channels to SE. PE has setups for the pixels, universes,channels and so on for each prop or pixel string you add