Importing channels

[KevinHittle]

LOR 4.2.6

Good afternoon everyone!

I was wondering if there was a way to import channels into a sequence that has existing channels?  Basically I have a 12 strip tree and the channels are good in a sequence I have ..But I have some pixels on the house that I want to use in that sequence.  Can I import just the pixels from the other sequence?  Or do I have to recreate them?

Kevin

[k6ccc]

Assuming you are using Sequence Editor, open both files, and you can copy and paste between the two files.

Sent from my Droid Turbo via Tapatalk, so blame any typos or spelling errors on Android

[k6ccc]

I have misunderstood what you are asking. Are you trying to import the sequencing information or the channel configuration? What I answered was for the first of those.

Sent from my Droid Turbo via Tapatalk, so blame any typos or spelling errors on Android

[KevinHittle]

Ya...the channel configuration is what I am asking about.  There seems to be no way to copy a group from one sequence to another.

 

Kev

[k6ccc]

No.  there is no way within the LOR software to combine two sets of channel configurations.  However adding even quite a few pixels into an configuration is not any big deal.  You don't have to do it one channel at a time.  Takes all of 15 seconds to add an entire universe of 170 pixels.

 

[saxon]

Then after what K6ccc said............Then you will EXPORT that channel configuration and give it a name. Now, starting from sctratch, open one of your tree sequences>edit>import/export channel configuration>import>choose the file you created. It will now add the channels to that and any other file you apply the import to.