Jump to content
Light-O-Rama Forums

New to LOR


Simonkhoury

Recommended Posts

Hi Guys,

i have only just purchased my LOR system and trying to make spence of it all, 

i have constructed my first sequence and I'm trying to play it now and it's not working.! 

I only have a basic licence does this not allow me to play music and a light show together or will I need to upgrade.!?

thanks so much for your help 

simon 

Link to comment
Share on other sites

Yes, basic license should be fine.  Lets check some things.

Are you trying to play it from the sequence editor?  Have you checked "Control Lights"?

Have you tested the controller from the hardware utility?  Solid light on the controller?

Have you defined all the channels in the sequence for the correct controller?

 

Link to comment
Share on other sites

It's a new thing here in Australia not to many people have them, Iv been watching a heap of YouTube clips to work it all out. 

Its not as easy as just plugging your lights in and away you go 

Link to comment
Share on other sites

Hi OzAz , 

thanks heaps mate, i have decided to try do a good show this year just trying to work out the LOR system has been a little tricky, where have you found most of your info for sequences? 

Link to comment
Share on other sites

On 11/5/2016 at 1:03 AM, Simonkhoury said:

Hi guys finally after many hours have worked out that I needed to assign channels ect 

it can be pretty tricky for a first timer 

It can be, best advice I can give is watch the tutorials online for LOR or other users.

Not only do they cover the basics but there are tips and tricks in some of them too.

  • Like 1
Link to comment
Share on other sites

  • The topic was locked
Guest
This topic is now closed to further replies.
×
×
  • Create New...