movieman4 Posted June 19, 2016 Share Posted June 19, 2016 Hello, I am trying to configer my pixcon16. i have it directly connected with my laptop and all other networks are off. when i go to network configuration i see my pixcon in white so thats good. but i click on it to configure it says i can't do it. anyone knows why? TIA! greetings Ronald from the Netherlands Link to comment Share on other sites More sharing options...
Randy Posted June 19, 2016 Share Posted June 19, 2016 Are your PC/laptop network settings compatible with the default settings on the Pixcon? 192.168.0.? Link to comment Share on other sites More sharing options...
movieman4 Posted June 19, 2016 Author Share Posted June 19, 2016 its dhcp enabled Link to comment Share on other sites More sharing options...
Mr. P Posted June 19, 2016 Share Posted June 19, 2016 Looks like you are still using S3, what level is your license? You need Advanced level to use it in E1.31. Link to comment Share on other sites More sharing options...
movieman4 Posted June 19, 2016 Author Share Posted June 19, 2016 4.2.12 advanced Link to comment Share on other sites More sharing options...
Mr. P Posted June 19, 2016 Share Posted June 19, 2016 Open up the Command Prompt window on the computer and see if you can ping the default address of the Pixcon. Link to comment Share on other sites More sharing options...
movieman4 Posted June 20, 2016 Author Share Posted June 20, 2016 i have put my laptop settings from dhcp to a steady adress : 192.168.0.1 and yes , i can configure it now Link to comment Share on other sites More sharing options...
Randy Posted June 21, 2016 Share Posted June 21, 2016 Glad to hear that worked for you... 1 Link to comment Share on other sites More sharing options...
movieman4 Posted June 21, 2016 Author Share Posted June 21, 2016 (edited) yes thanks. i have put it in LOR mode and switched the 3 jumpers , will that work for me? becourse the red light is still blinking......and not on. Edited June 21, 2016 by movieman4 Link to comment Share on other sites More sharing options...
dgrant Posted June 23, 2016 Share Posted June 23, 2016 Mine are connected via TCPIP to a switch which is then connected to the computer. Once both the computer and Pixcon16 are on the same network as you've done, the light will stop blinking after you launch the control panel therefore the system is talking to it with DMX data over TCPIP. Link to comment Share on other sites More sharing options...
Recommended Posts