Odd Behavior on a single prop

[Ron Boyd]

Brian, I'm getting an odd behavior on a prop. I have a new addition that matches the one I had this passed year. I am sending you an email with the 2 visualizers, sequence and a screen cap.

 

I know I'm missing something, I used these same props all of last year except the windows. I copied the arches and Pixel pole from last year and re-assigned the Universe #s. 

 

If you could take a peek, it might even be a bug or I'm forgetting something.

 

Thanks,

Ron

[BrianBruderer]

I received the visualizations and the sequence.

 

From 4.1 seconds to 4.8 seconds there is a morph going up the pole with the exploding star at the top. From your screen shot that you sent it looks like the "odd behavior" is that there is a shorter morph also happening at the same time on the pole.

 

I scrolled down, and on layer 11 there is shorter morph. Is that the odd behavior you are referring to?

[Ron Boyd]

That would be the one. Removed the shorter morph and all is well. Thanks Brian. I knew it was something I was missing. I was on my laptop and the screen is much smaller than my normal sequencing machine.

 

Thanks,

Ron