The up and down effect

[Gilles]

So, my spiral runs from the bottom of the tree to the top, and stays there (by adding a scene at the end of that morph).  I want that spiral disappears from top to bottom, gives the effect like it sits down and stands up.  Any idea how to do it?  I've tried a few methods but get no result.  Thanks

[BrianBruderer]

Do a single left mouse click on the bottom left of the sequencing grid, then do a click and drag right mouse click diagonally from the bottom to the top.

 

Hope I described that Ok. If you do that, it will look like the spiral is "standing up"

[Gilles]

Brian:  That is not what I mean.  I want pixels to run up, with colored tail, stop and then run down, erasing all the lit-up pixels along the way.

Edited November 25, 2015 by Gilles

[BrianBruderer]

Try setting the head length of state1 to 1 and the head length of state2 to the height of your grid. Or vice versa.

[Gilles]

I still couldn't get the the running down and turn off all lights along the way like I want to.  I can get it done by adding the appropriate scene as State 1 goes down but it is such a tedious job.

[BrianBruderer]

send me an email at brian@superstarlights.com