Stan B Posted November 18, 2015 Share Posted November 18, 2015 I have 3 MR16 LED flood lights that I am wiring to a CMD16D board via a Holiday Coro 350 watt power supply. I have individually wired each light with a separate hot and bundled the neutrals into one lead. I have each flood light connected to it's own number on the board, 1 for the red, 2 for the green, and 3 for the blue. I then took the lead from the bundled neutrals and connected it to one of the neutrals on the board. However, the lights will not light individually. The only time they light, they all light at the same time. Using the Hardware Utility, no light will turn on until I get to the light that I have the neutral connected to, then they all turn on. Am I doing something wrong? Or is this board not capable of sharing neutrals. Thanks,Stan B Link to comment Share on other sites More sharing options...
Dennis Laff Posted November 18, 2015 Share Posted November 18, 2015 Are these flood lights 12 volt rgb Link to comment Share on other sites More sharing options...
Stan B Posted November 18, 2015 Author Share Posted November 18, 2015 Are these flood lights 12 volt rgbYes they are 12 volt. Each light is separate. Link to comment Share on other sites More sharing options...
Santas Helper Posted November 18, 2015 Share Posted November 18, 2015 Try reversing the wiring. Link to comment Share on other sites More sharing options...
Stan B Posted November 18, 2015 Author Share Posted November 18, 2015 They are MR 16 with 32 Led's. Link to comment Share on other sites More sharing options...
Stan B Posted November 18, 2015 Author Share Posted November 18, 2015 Try reversing the wiring.Are you advising to reverse the leads from the power supply? Link to comment Share on other sites More sharing options...
Santas Helper Posted November 18, 2015 Share Posted November 18, 2015 No, the wiring on that channels. The LED wires connect to "-" and the neutral to "+".This is how my LED floods are connected and work. Link to comment Share on other sites More sharing options...
Stan B Posted November 18, 2015 Author Share Posted November 18, 2015 No, the wiring on that channels. The LED wires connect to "-" and the neutral to "+".This is how my LED floods are connected and work.BINGO !!!!! Thank You, Thank You, Thank You !!!!! You have made my day and then some. Again thanks. Enjoy the rest of your evening. Happy Thanksgiving, Merry Christmas and Happy New Year to you and yours !!!!! Stan B Link to comment Share on other sites More sharing options...
Dennis Laff Posted November 18, 2015 Share Posted November 18, 2015 Connect how the manual says each socket has its own positive and negative Link to comment Share on other sites More sharing options...
Santas Helper Posted November 18, 2015 Share Posted November 18, 2015 BINGO !!!!! Thank You, Thank You, Thank You !!!!! You have made my day and then some. Again thanks. Enjoy the rest of your evening. Happy Thanksgiving, Merry Christmas and Happy New Year to you and yours !!!!! Stan B And the same to you my friend!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now