travis p Posted November 4, 2015 Share Posted November 4, 2015 im trying to get super star to show my complete display in its preview when playing but it only shows my matrix i have checked every thing i can find no change PLEASE HELP it worked ok in 3 but not in 4.0 pro Link to comment Share on other sites More sharing options...
k6ccc Posted November 4, 2015 Share Posted November 4, 2015 Are you running SuperStar from a visualization that has the entire setup? Link to comment Share on other sites More sharing options...
BrianBruderer Posted November 4, 2015 Share Posted November 4, 2015 Please email your visualization to brian@superstarlights.com and I will take a look at it. The visualization file will end with .lee and will be at: c:/ (your lightorama folder) / Visualizations / Editor Link to comment Share on other sites More sharing options...
travis p Posted November 4, 2015 Author Share Posted November 4, 2015 e mail sent thanks Link to comment Share on other sites More sharing options...
travis p Posted November 4, 2015 Author Share Posted November 4, 2015 file and screen mp4 sent Link to comment Share on other sites More sharing options...
BrianBruderer Posted November 4, 2015 Share Posted November 4, 2015 Yes, I received them and looked at them. You were correct to use "scrunch the sequencing grid" in order to get everything in less than 24 rows, because 24 rows is the most that Instant Sequence can do. It looks like superstar has some bugs in it when using "scrunch the sequencing grid". It doesn't always do the timing map correctly. Click on the "Timing Map" button in the Instant Sequence dialog box. In the Timing Map dialog box make sure there are check marks for all the rows in your display. If not, click on "Set Freq Spectrum" and it will do it.The default is "Low to High." I played with it and I found I got better results using "High to Low." After selecting "High to Low" click on the "Set Freq Spectrum" button. That will fix most the problems, but there is another bug that makes it so your white trees on the left never come on. I have found the source of the bug and the fix will be in the next release. I will also email you a way to get the fix tonight. Link to comment Share on other sites More sharing options...
travis p Posted November 4, 2015 Author Share Posted November 4, 2015 thanks Brian The this is much better looking forward to the fixes Link to comment Share on other sites More sharing options...
travis p Posted December 23, 2015 Author Share Posted December 23, 2015 brian the fix you e mailed worked fine untill my computer did an update now its just like it was befor the fix any ideas? Link to comment Share on other sites More sharing options...
BrianBruderer Posted December 23, 2015 Share Posted December 23, 2015 Did you try going into the Timing Map and click on the "Set Freq Spectrum" button? Link to comment Share on other sites More sharing options...
travis p Posted December 23, 2015 Author Share Posted December 23, 2015 yes i did Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now