eamitche Posted October 12, 2015 Share Posted October 12, 2015 I have a CMB24D and PS-LED-12V-200W and I'm not getting any power to the CMB24D. Worked one night and not the next. Checked fuses on CMB24D. Any suggestions? Link to comment Share on other sites More sharing options...
dgrant Posted October 12, 2015 Share Posted October 12, 2015 Check the power supply output itself and see if you are still getting 12vdc out of it. I ruined one on an intelligent controller when I overloaded it by turning everything on to white(max draw) and in this case, way above the 200 watt rating. Link to comment Share on other sites More sharing options...
TonyD Posted October 13, 2015 Share Posted October 13, 2015 Did you try unplugging the power supply from its power source (120v)? It is possible it overheated or overloaded and tripped and needs to be unplugged to reset? Link to comment Share on other sites More sharing options...
Mr. P Posted October 13, 2015 Share Posted October 13, 2015 (edited) Did you buy the CMB24D as a package with the light strips from LOR? If you are using light strips other then LORs then you probably overloaded the power supply. Most commercial strips are rated at 36w a strip so that would be 288w full on which would overload the PS. LORs strips are rated at 20w. Edited October 13, 2015 by Mr. P Link to comment Share on other sites More sharing options...
eamitche Posted October 14, 2015 Author Share Posted October 14, 2015 I had left it unplugged for hours and it still did not work when I plugged it in. Plugged it in a day later and its working fine. I currently have 7 RGM 10W Floods connected to it. Link to comment Share on other sites More sharing options...
Recommended Posts