primvip Posted September 19, 2015 Share Posted September 19, 2015 My set up is below. I am getting a low humming or buzz on the broadcasting radio signal when on. I can't figure out the issue any ideas? I have the good transmitter, but just get a low hum when no music is playing. I believe the radio channel is clear, so not sure of the problem. Any thoughts or ideas to help? thanks Link to comment Share on other sites More sharing options...
Mega Arch Posted September 19, 2015 Share Posted September 19, 2015 Get some more ties and get the audio cable off the power cable. Can't be touching anything. Link to comment Share on other sites More sharing options...
primvip Posted September 19, 2015 Author Share Posted September 19, 2015 Get some more ties and get the audio cable off the power cable. Can't be touching anything.the power cableDoesn't need to be touching the audio cable? Link to comment Share on other sites More sharing options...
Mega Arch Posted September 19, 2015 Share Posted September 19, 2015 Also looks like your mic volume is turned all the way up. Since you're not using it, turn it all the way down. Just to be sure. Link to comment Share on other sites More sharing options...
Mega Arch Posted September 19, 2015 Share Posted September 19, 2015 (edited) Also, might try a line in splitter to RCA and plug into the backside. But that will also require more tiewraps. Edited September 19, 2015 by Mega Arch Link to comment Share on other sites More sharing options...
PhilMassey Posted September 19, 2015 Share Posted September 19, 2015 Last resort, try something like this.http://www.radioshack.com/ground-loop-isolator/2700054.html Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now