Need Assistance with an ECGP12

[ezimnow]

I have to set up a Null Pixel in the Software and can't find a document on it. Need assistance from someone who has set one up Please...

[77doran]

Have you looked through the auschristmas 101 manual?

http://auschristmaslighting.com/forums/index.php?action=dlattach;topic=5803.0;attach=5477

I think page 25 has setup examples, for null pixels.

Here is a link for the p12r manual, also.

http://auschristmaslighting.com/forums/index.php?action=dlattach;topic=2232.0;attach=2153

Edited August 15, 2015 by 77doran

[ezimnow]

I did search there, didn't find anything but let me try what you posted.....thanks

[ezimnow]

No I Don't see anything there. This would be specific to the ECGP12 Controller and how to add it in the Software on the Configuration page ...

[msteiner57]

https://www.youtube.com/user/harrison0550/videos.

 

Try out this link. This should get you going, it is what I used and it was very easy to follow. Just look for the ECG videos

Edited August 15, 2015 by msteiner57

[ezimnow]

Checking .....Thank you

[Dennis Laff]

On the configuration page  go to effects configuration it asks how many null pixels you want to use.

[ezimnow]

Ok Thanks Everyone I got it..I was on the effects config but I wasn't sure If I had to add more than just the 1 Null Pixel. As it turns out you add the starting pixel 1) and then the total amount of pixels for that Port (56) then the Null...Thanks Again...