EmmienLightFan Posted June 23, 2015 Posted June 23, 2015 When doing power injection do I just do the + or both? To link 5 and 12v pixels can I just connect the data wire? Thanks.
Darryl Lambert Posted June 23, 2015 Posted June 23, 2015 For power injection your ground or - should be continuous.
EmmienLightFan Posted June 23, 2015 Author Posted June 23, 2015 Ok. So just +? That means I don't need as much wire.
saxon Posted June 24, 2015 Posted June 24, 2015 DO BOTH! I experimented last year and you need the extra negative run!! When I added just the + it helped a little but when I added the neg all was good. At least this is the case I found with pixel strips.
sticks4legs Posted June 24, 2015 Posted June 24, 2015 (edited) If you are using the same power supply do both, if you are using 2 power supplies the ground should be continuous but the positive separate Edited June 24, 2015 by sticks4legs
Recommended Posts