cdlouke Posted December 14, 2014 Share Posted December 14, 2014 Ok I got my ctb16pcg3 put together and lights test fine in the hardware utility. I got some free sequences from the forum and loaded them into the sequencer. It is working and music is playing...But no lights respond. What am I doing wrong. Not a real techie just a guy that likes Christmas lights. Link to comment Share on other sites More sharing options...
dgrant Posted December 15, 2014 Share Posted December 15, 2014 (edited) If you are using the sequencer to play the file with, go to the Play menu pulldown and insure the "Control Lights" button is turned on. Also, look in the bottom right corner of the sequencer at a box there. It should be Blue. What level of license do you have? Edited December 15, 2014 by dgrant Link to comment Share on other sites More sharing options...
chandalen Posted December 17, 2014 Share Posted December 17, 2014 From the LOR control panel, build a show and run it that way. Get fancy and put the show into a schedule so you can just let it do its own thing. Link to comment Share on other sites More sharing options...
iflights Posted December 17, 2014 Share Posted December 17, 2014 Run, before you become obsessed with twinkling Christmas lights! Seriously. Welcome. Link to comment Share on other sites More sharing options...
james campbell Posted December 19, 2014 Share Posted December 19, 2014 Also you can't have the hardware utility open and play though the sequence editor Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now