jevely Posted November 27, 2007 Share Posted November 27, 2007 This is my first year with a computerized light show (starting with 32 channels) so I expect to post alot of newbie questions over the next couple of weeks. I have finished assembling my two controllers and started sequencing... My goal is a lighting date of Dec 15th.First question: Is the X10 Firecracker Interface compatible with LOR II? Link to comment Share on other sites More sharing options...
Tim Fischer Posted November 27, 2007 Share Posted November 27, 2007 I'm pretty sure the CM11A is the only supported interface.-Tim Link to comment Share on other sites More sharing options...
jevely Posted November 27, 2007 Author Share Posted November 27, 2007 Thanks, Tim. I'll start looking for a CM11A.Jim Link to comment Share on other sites More sharing options...
Tim Fischer Posted November 27, 2007 Share Posted November 27, 2007 Readilly available cheaply on eBay. I just picked up a new one last month as my 5-year-old one was acting flaky.-Tim Link to comment Share on other sites More sharing options...
Greg Posted November 27, 2007 Share Posted November 27, 2007 Tim,When you give an on command to an x10 channel, Does it stay on until you send another command? I don't have any x10 boxes but am considering it for some static stuff.greg Link to comment Share on other sites More sharing options...
Tim Fischer Posted November 27, 2007 Share Posted November 27, 2007 Greg wrote: Tim,When you give an on command to an x10 channel, Does it stay on until you send another command? I don't have any x10 boxes but am considering it for some static stuff.Unfortunately no -- LOR shuts all channels down at the end of every sequence. But... you can put them in a background sequence if you want stuff to be on for the entire show. That's how we do it...-Tim Link to comment Share on other sites More sharing options...
Recommended Posts