Jump to content

Controller help needed


RicPenn
 Share

Recommended Posts

Here I am with another stupid question, not sure how to word a search for the problem so here I am.

I have two controllers(160xW) in the sequence editor they both work fine but when I fire up the show utility to get the lights to come on by themselves, only controller #1 comes on. Any ideas?

Link to comment
Share on other sites

Okay, to make sure I understand ...

When you play the sequence within the sequence editor, both controllers work as they are supposed to.

When you try and run the shows via the control panel, only one controller works?

I would re-create the show, just to make sure you haven't used an old sequence.

Link to comment
Share on other sites

Ok got it, I had help from my son and on the opening seq of the show he had somehow "unasigned" the channels.....dang it's cold outside!

Thanks for the help Dan!

Link to comment
Share on other sites

LightORamaDan

RicPenn wrote:

Ok got it, I had help from my son and on the opening seq of the show he had somehow "unasigned" the channels.....dang it's cold outside!

Thanks for the help Dan!


Thanks to Don! Having a Dan and a Don as administrators we do get mixed up.

Dan
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...