roy a guldenpfennig Posted May 12, 2014 Posted May 12, 2014 Hi ! Guys. Hope someone can give me a solution. I made a sequence in nutcracker and exported it to a LOR file and tried to play it through the ECG P12S controller to RGB pixels and nothing, NO LIGHTS. I have a error message but don't know enough to solve the problem. Here's a snapshot of the errors. If anyone can help it would be appreciated.
Dennis Laff Posted May 12, 2014 Posted May 12, 2014 When you sent file to lor did you convert it from X-lights to lor
roy a guldenpfennig Posted May 12, 2014 Author Posted May 12, 2014 No, but I thought it did that in the export tab, but i'll go back and try that again. thank Dennis
Don Posted May 13, 2014 Posted May 13, 2014 Unless I've missed something in the recent releases of LOR, "xseq" isn't a valid LOR file extension.
roy a guldenpfennig Posted May 13, 2014 Author Posted May 13, 2014 hi, Don I know that LOR can't run "xseq". but from what I believe xlights is saying when you export the sequence it converts it from a xseq file to a LOR file, in my case .LAS file.
Don Posted May 14, 2014 Posted May 14, 2014 hi, Don I know that LOR can't run "xseq". but from what I believe xlights is saying when you export the sequence it converts it from a xseq file to a LOR file, in my case .LAS file. I see .xseq in your error log, which is why I mentioned it.
roy a guldenpfennig Posted May 15, 2014 Author Posted May 15, 2014 OK, Don maybe I'm not where I thought I was thanks for the help and reply .
Recommended Posts