gwoodams Posted May 4, 2014 Share Posted May 4, 2014 First, I'm a lightorama Newbie. I'm going to create a 12 strip CCR tree. I have I believe all the Hardware and software needed for the tree.But Now how does it all work together? Or better yet How does it all hook together to make it work.I have Purchased sequences I just really a step by step idiots guide. Thanks for any help you can give me Gary Link to comment Share on other sites More sharing options...
Dennis Laff Posted May 5, 2014 Share Posted May 5, 2014 What do you need help with building the tree or setting it up in lor Link to comment Share on other sites More sharing options...
gwoodams Posted May 5, 2014 Author Share Posted May 5, 2014 I need help in setting it up in lor Link to comment Share on other sites More sharing options...
htebault Posted May 6, 2014 Share Posted May 6, 2014 Setup is straight forward. Suggest you use a HiSpeed adaptor to run the 12 CCR's and a separate adaptor for other LOR controllers. Each CCR Controller will have a unique address - I have labeled each when set to help me remember what I did...Decide how many LOR controllers / CCR's you will have in your network - I found 12 CCR's in one Highspeed network to be ok for my show - and I had four LOR contollers on a second regular speed network, all run from my XP system.Check the forms for CCR tree construction - I used 3/4" Sq Alum tubing in mine - others user rope or tubing. Link to comment Share on other sites More sharing options...
Dennis Laff Posted May 6, 2014 Share Posted May 6, 2014 Did you already set your 12 ccr.s id numbers in the superstar sequencer if not go to tools then channel cofiguration Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now