dcrumlich Posted December 8, 2013 Share Posted December 8, 2013 I have just purchased a LOR1602MP3 with the DC-MP2 director. I built a show and bought a show from LOR.I used the Simple show builder to import the 2 shows on the disk that came with it. for a 16 zone tree.I put the SD card it and it displayed it was waiting on the scheduled time (LED-R) and the lights came on full at the scheduled time. Every half hour (we programmed to start every half hour) The yellow lights blink and then it does nothing. I tried to rework the show in the Show editor. Changed it to play immediately and still nothing. This time no lights at all. Ideas? Thanks for helping me get off the ground. Link to comment Share on other sites More sharing options...
Recommended Posts