Lights stay on after shutdown

[jlarson]

Hello All,

 

I am running 6 lor controllers, 4 CCR's and E1.31 for my display this year. I have the LOR split into 2 networks. The show runs fine on all the controllers. I told the software to leave the lights on between shows. At the end of the night I have it run a shutdown sequence and to turn all the lights off at the end. During the shut down sequence I turn all the lights off one at a time. I have one controller that will turn on random lights and will leave them on afterwards but works find durning the show. All lights on that controller are inconsedent lights.

 

 

Any ideas what else to check for?

 

[Jim Hans]

I would double check your controller and channel assignments for that shut down sequence.

[Steven]

A few years ago, I had some lights that would come on at random. It turned out to be noise on the network cable. Installing a RS485 terminator at each end of the network solved the problem.