mini director

[kevcatt]

Just received my mini director and yes I'm a newbie so i have no idea how to use. I used my LOR sequencer and made my sequences and have saved them to my SD card, what do I need to do next or is it just plug and play. I have the manual but not much help. Also when it get thru all the sequences does it loop back or how does that work. thanks for the help

[Don]

There are two ways to create a show for use with the mini-director.

 

1) The Simple Show Builder

2) The Hardware Utility

 

Both are already installed on your computer.  The Simple Show Builder is, well, simple. Follow the prompts and you're good to go.

 

The Hardware Utility can be used as well. The instructions on how to set up shows with the Hardware Utility start on about page 13.

[bisquit476]

Like Don says, use the SSB or the HU. You cannot just add the .lms or ,las files to the sd card, they have to be changed to a .seq format which then loads (with the audio) onto the sd card. It is done automatically by the SSB or HU. The sequences will loop until power is removed from the mini director.