jck46 Posted April 29, 2013 Share Posted April 29, 2013 can someone help me with rgbs i need a wiring diagram for wiring the rgbs with using cat 5 connecters and cable thanks Link to comment Share on other sites More sharing options...
kryolla Posted April 30, 2013 Share Posted April 30, 2013 http://www.holidaycoro.com/kb_results.asp?ID=92 if you have anymore question i'll try and help out Link to comment Share on other sites More sharing options...
jck46 Posted April 30, 2013 Author Share Posted April 30, 2013 my question is i have 4 wire rgb modules the lor controller i have is wired with cat 5 connections so i am not sure which wires to hook to what Link to comment Share on other sites More sharing options...
scubado Posted April 30, 2013 Share Posted April 30, 2013 The RJ45 connectors on the LOR boards are for communication for the controllers only. What model controllers do you have? Link to comment Share on other sites More sharing options...
kiplorenzo Posted April 30, 2013 Share Posted April 30, 2013 Howdy,You might want to look into DMX to control the RGB. The next thing to know is if they are dumb RGB or Smart Strings. If you need more detailed information, I am on another board that deals heavily with the RGB LEDS... It's at DIYLIGHTAnimation.com. I do love the LOR stuff as it is the heart of controlling everything in the display and also planning on Stage equipment too. Kip Link to comment Share on other sites More sharing options...
Recommended Posts