joe b. Posted December 8, 2012 Share Posted December 8, 2012 I set the first box to unit id 01 with the second controller box disconnected, how do i get the second box to work and how do i connect it. Link to comment Share on other sites More sharing options...
Don Posted December 9, 2012 Share Posted December 9, 2012 You would connect them together via CAT5 cable. Take a look at the Typical Setups for more info. Link to comment Share on other sites More sharing options...
ainsworth Posted December 9, 2012 Share Posted December 9, 2012 Don is correct. I would suggest connecting the second unit up alone and setting the id before connecting both together. You can set ids while they are connected together, but it's easy to screw up if you aren't very careful. Link to comment Share on other sites More sharing options...
joe b. Posted December 9, 2012 Author Share Posted December 9, 2012 So does the second box go to the next number which would be 02 Link to comment Share on other sites More sharing options...
wallleyes Posted December 9, 2012 Share Posted December 9, 2012 Yes Link to comment Share on other sites More sharing options...
james campbell Posted December 9, 2012 Share Posted December 9, 2012 also when you daisy chain them box 2 can be your first inline. so once you have the unit id's set they can go in any order you need them to go Link to comment Share on other sites More sharing options...
joe b. Posted December 11, 2012 Author Share Posted December 11, 2012 thanks, everything is working. Link to comment Share on other sites More sharing options...
Recommended Posts