Help

[joshua]

Could someone make a how to from scratch for the viz? I am starting over this year and need a little help getting started.thanks

[Ron Boyd]

http://forums.lightorama.com/index.php?/topic/15271-official-s3-lor-visualizer-props-and-fixtures-attachments/

There are a ton of props and fixtures here. Probably have some you need, you'll just need to wire them to your channel line-up.

Someone has started doing just that over on CC. Might want to take a look at these.

http://www.christmascarolina.com/forums/software/2728-tutorial-visulizer.html

Edited September 24, 2012 by Ron Boyd

[shfr26]

Good luck, been having problems and I can not get an answer.

[travis p]

ron thanks for posting the link those are ruff and certainly not polished but thay work i was helping someone on cc but everybody that needs them feel free

[Don]

Could someone make a how to from scratch for the viz? I am starting over this year and need a little help getting started.thanks

This post from Mike has some really good pointers on some little hints that will go a long way in the future.

Here is a tutorial for the visualizer. The section called "Drawing Lights and Creating Fixtures" will give you a good overview of the basics involved with creating objects in the visualizer.

Those two links should give you a good start. Draw out your display using the instructions above. (2nd link) Keep in mind the topics mentioned in the 1st link.

The visualizer is great, but it does take some getting used to.