Guest guest Posted December 21, 2006 Share Posted December 21, 2006 Got my board at the end of OCT 06 have been using my new LOR blue board for about 2 weeks - has been working wonderful with no problems - then last night channel 16 staying on , reset the board ie turned to 00 then back to 01. It has also blown 4 transformers (as i was running low voltage on it as well as a rope light (which it blew as well).Changed the rope light and connected this only(as I have no spare transformers:{) it comes on straight away as I turn the power onto the board .... tried the 00 setting etc again no change - any ideas ? Link to comment Share on other sites More sharing options...
Guest guest Posted December 21, 2006 Share Posted December 21, 2006 I'd bet that something related to channel 16 has gone bad. Unfortunately, components will fail from time to time.Send an email to support@lightorama.com telling them that you have a channel stuck on. They will work with you to get a replacement, and/or arrange to have it sent in for repair after the season. Link to comment Share on other sites More sharing options...
Guest guest Posted December 21, 2006 Share Posted December 21, 2006 Thanks for the advice.:cool:Merry Christmas. Link to comment Share on other sites More sharing options...
Recommended Posts