Christo25 Posted January 4, 2012 Share Posted January 4, 2012 Can somebody provide me with some insight on how to ensure that my 7 channel 10ft arch has a continuous flow to it when bouncing? I've tried the on/off from one channel to the next but it does not look like it's flowing... it looks like it's turning on and off quickly.I'm sure it's easy as heck... I just can't figure out for the life of me.Can somebody assist a n00b. Link to comment Share on other sites More sharing options...
jimswinder Posted January 4, 2012 Share Posted January 4, 2012 use fades that overlap each channel...the more the fade overlaps, the smoother the effect Attached files Link to comment Share on other sites More sharing options...
dstevens Posted January 4, 2012 Share Posted January 4, 2012 jimswinder wrote: use fades that overlap each channel...the more the fade overlaps, the smoother the effectYou can also use both up and down fades to smooth the effect. Link to comment Share on other sites More sharing options...
amcdonald307 Posted January 4, 2012 Share Posted January 4, 2012 You can even fade and chase at the same time. Attached files Link to comment Share on other sites More sharing options...
Recommended Posts