michael spencer Posted December 13, 2011 Share Posted December 13, 2011 Show working fine at the moment but the expected high winds may change that. The question is if I change a sequence and save changes, will the changes automatically transfer to the show schedule, or will I have to replace the existing one in the show shedule with the new saved one, hope this makes sence. Link to comment Share on other sites More sharing options...
bob Posted December 13, 2011 Share Posted December 13, 2011 If you make a change to a sequence -- for example turning an "off" cell on -- and that sequence has already been loaded in the currently playing show, the Show Player will not pick the change up until after the show finishes. So, you would either have to wait until the show's natural end or else manually stop it prematurely (e.g. "Disable Shows Gracefully").If you make a change of sequences within a show -- for example changing the order that two sequences are supposed to play in, or adding a sequence to a show -- the Show Player will notice it quickly, and the current show will be put into shutdown mode. After it shuts down, it will start up again, using the new definition of the show. Link to comment Share on other sites More sharing options...
Recommended Posts