chipwdw Posted November 30, 2011 Share Posted November 30, 2011 ok, now what. i have one channel that stays on at about 30% when it should be off. it does work, just wont go below 30% and stays on when should be off. tried the HU, same thing, removed controller from network = same, unplugged controller, plugged back in = same. from what i read sounds like a triac, using CTB16PC RTR, ran fine last 2 years. so what is issue, and how do i fix it. thanks for the help.chip Link to comment Share on other sites More sharing options...
chipwdw Posted December 1, 2011 Author Share Posted December 1, 2011 ok, went out and watched for a while, the channel would work fine a few minutes then be stuck on for few songs, then work ok for a song, then be stuck again. anyone have any suggestions? thanks for the help Link to comment Share on other sites More sharing options...
papap Posted December 1, 2011 Share Posted December 1, 2011 Had the same problem with 2 controllers. After sho was over one channel on ach controller would not go out. Channel 11 pn both units. They are sending me replacements. They said the chip is fixing to go out. Both of mine are on new ctb16pc3g units. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now