Can't get background back

[Denise Brunner]

Hi everybody, and a early Happy Thanksgiving !!

When I set up my visualizer in S2 I used a background image to set my lights on. When finished I removed the image so that the lights only were left. Works really nice except.... now I want to add more items to the display and I can't the image back in the visualizer. Problem is that when I add the picture it is way to large and can't hit the accept button. I can move the window horz but not vert to get to the button. Any ideas?????

Thanks,

Denise

[bob]

Sorry about that. You can work around this problem, though:

The tab key cycles through the following four buttons on that screen, in this order:

1. "+"
2. "-"
3. "OK"
4. "Cancel"
(then back to 1)

So, for example, if you are on the "+" button, and want to get to the "OK" button, hit the tab key twice. Then you should be on the "OK" button, so you could then hit the return key, and it will click on the "OK" button.

[Denise Brunner]

Thanks, will give it a try !!