gsxr7500 Posted October 31, 2011 Share Posted October 31, 2011 I have some sequences with multiple tracks. This year i added on another 16 channel controller and when i went to add it below my last channel it added fine but only to one track. Can i get it in all track without physically typing in all info on each track. Also if i only add it to 1 track will it have any problems playing? Link to comment Share on other sites More sharing options...
bob Posted November 1, 2011 Share Posted November 1, 2011 It will play fine even if it's just in one track. However:Can i get it in all track without physically typing in all info on each track You almost certainly should not physically type in all info (such as unit ID and circuit ID) in each track. Doing so will mean that you have two different channels in the same sequence that are both trying to control the same circuit, and unless you're very very careful, it may lead to unexpected behavior.Instead, if you want the same channel in multiple tracks, use "Copy to Track" (from the channel button's right click popup menu). That will put the same channel in both tracks, which is OK, as opposed to having two different channels that happen to have the same settings in the two tracks, which is not so OK. Link to comment Share on other sites More sharing options...
Recommended Posts