Error

[Larry Leonhardt]

When i start up the Visualizer, i get this error:

Visualizer draw points size of 201 exceeded, remaining drawpoints not loaded.



What does this mean, and how do i correct it?

[bkdraft]

It means you used too many points to draw out your lights. I run into the same thing. I added a star from the list to the top of my tree and it put me over the limit. I went back and drew the star with a string of lights and it did not use near as many "Points". You have to watch out when imported the stuff from the list, it will tell your the point count.

[Larry Leonhardt]

Thank you, it must be my Antimated Santa Clause.

[Larry Leonhardt]

Thanks, fixed it thanks.

One other question, what does TCM1-4 mean?

[bkdraft]

TCM are the rows of green squares in the SS. You can play with the settings for each one of the TCM's to see the difference when you do a Instant sequence. If you click on one square at a time you will see the lights that square controls.

[BrianBruderer]

Larry Leonhardt wrote:

Thanks, fixed it thanks.

One other question, what does TCM1-4 mean?

TCM stands for 'Theme, Color, and Movement'
You can define 4 combinations of Theme, Color and Movement and then assign them to different rows of your sequencing grid. If you are just using CCRs, the rows equate to CCR 1, CCR 2, CCR 3, etc. If you are using a visualization, it splits your lights up into rows on the green sequencing grid.
The grid of radio buttons underneath the four TCM drop downs shows what TCM each row is assigned to.