Larry Leonhardt Posted October 14, 2011 Share Posted October 14, 2011 How do you draw a arch using 1 ccr, but with 2 arches....You know what i mean...:X Link to comment Share on other sites More sharing options...
LOR Staff Posted October 14, 2011 Share Posted October 14, 2011 Create 2 arches. Use the same base address/etc for both fixtures, but set the start pixel to '26' on the second one. Link to comment Share on other sites More sharing options...
LOR Staff Posted October 14, 2011 Share Posted October 14, 2011 Jeff's way works as well, and it really depends on what you want.Jeff's way more closely represents what is actually on the stage: 1 CCR that controls 2 things, that are closely tied together.The starting pixel way allows you more flexibility in positioning/etc, but it does require you to take some extra steps (matching base addresses, etc). Link to comment Share on other sites More sharing options...
ItsMeBobO Posted October 14, 2011 Share Posted October 14, 2011 You can also just use one drawn by another person. Attached files CCarchParabolicDoubleR1.lff Link to comment Share on other sites More sharing options...
BrownOut Posted October 15, 2011 Share Posted October 15, 2011 Jeff- Thanks for the video! Seeing how to make the double arch really helped me. Link to comment Share on other sites More sharing options...
BrownOut Posted October 15, 2011 Share Posted October 15, 2011 Ok... how do I select pixels per segment?-Logan Attached files Link to comment Share on other sites More sharing options...
Larry Leonhardt Posted October 15, 2011 Author Share Posted October 15, 2011 Thanks for all that replyed to this post, That helps out alot. Link to comment Share on other sites More sharing options...
Larry Leonhardt Posted October 15, 2011 Author Share Posted October 15, 2011 Ok, got my double arch made, Thanks. I want to make a Santa with a waving arm, this would be a prop also ?, If so how do i geet it to use one of my regular LOR 16 channel boxes ? Link to comment Share on other sites More sharing options...
LOR Staff Posted October 15, 2011 Share Posted October 15, 2011 http://www.lightorama.com/downloads/3.0.0/help/tutorial.htmCheck the section on 'Wiring' (or read it all if you haven't had a chance yet) Link to comment Share on other sites More sharing options...
LOR Staff Posted October 15, 2011 Share Posted October 15, 2011 I think that's just the way the screen was captured. Link to comment Share on other sites More sharing options...
BrownOut Posted October 15, 2011 Share Posted October 15, 2011 Nope. They are blacked out. Can't click in them. Still reading and trying things. Link to comment Share on other sites More sharing options...
evan.a Posted October 15, 2011 Share Posted October 15, 2011 Jeff, Thanks for the video. Link to comment Share on other sites More sharing options...
BrownOut Posted October 24, 2011 Share Posted October 24, 2011 BrownOut wrote: Ok... how do I select pixels per segment?-LoganThe blank is still black, but if I put the cursor over the down arrow, the number was briefly shown and I was able to create the correct device. I have tried many video drivers and am just happy to have my CCR devices added in. Thanks for the help-Not having a LOR display last year and my learning curve with CCRs, this visualizer is a huge help.EDIT: spelling Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now