Guest guest Posted November 20, 2006 Share Posted November 20, 2006 I would like to run 2 strings of C-9's per channel but have noticed the 2 together put out 3.15 amps. I do not want to mess up my LOR. Has anyone run 2 C-9 strings together on 1 channel before?ThanksShawn Link to comment Share on other sites More sharing options...
Guest guest Posted November 20, 2006 Share Posted November 20, 2006 Shawn - LOR supports up to 8 amps on a single channel. But remember the 15 amp limit per side of the controller.D.T. Link to comment Share on other sites More sharing options...
Guest guest Posted November 20, 2006 Share Posted November 20, 2006 Depends on how long your strings are. 2 - 25 foot strings are fine. I made custom strings of c9s as long as 125 feet 1 bulb/ foot. It also depends on the wattage of your c9s. Link to comment Share on other sites More sharing options...
Guest guest Posted November 20, 2006 Share Posted November 20, 2006 Thanks. For some reason I had 3.00 amps per channel stuck in my head.Shawn Link to comment Share on other sites More sharing options...
Guest guest Posted November 20, 2006 Share Posted November 20, 2006 Hold on.... that is partially correct.... What board are ypu using? Are there heatsinks on thie board? Without heatsinks installed the CTB16 can control up to 2 Amps per channel. With heatsinks properly installed it can control up to 8 Amps per channel. Maximum capacity of the card is 40 Amps. Link to comment Share on other sites More sharing options...
Recommended Posts