Dale J Posted July 24, 2011 Share Posted July 24, 2011 well i finely got my dc board mounted in its home, i used an old alarm panel box and power supply, 3 amps should be enough hopefully, sad thing is when i went to test it my old Sony seems to have bit the dust, i do have most everything backed up but i don't have a license copy on this lap top, so i have sent in a request for my license key so i can get re-situated, I went with hard wiring of the lights for now, but if i can find some reasonable priced plugs i may add those to the cat 5 cable, i just have to unscrew them now when not in use, here are a couple of pics Attached files Link to comment Share on other sites More sharing options...
Dale J Posted July 24, 2011 Author Share Posted July 24, 2011 this is how my wall washers looked after getting them mounted in there housingsSorry, I'm not sure how to get more than one pic on one post Attached files Link to comment Share on other sites More sharing options...
Dale J Posted July 24, 2011 Author Share Posted July 24, 2011 one more with 5 lights attachedi have 50 foot of cat 5 run to each lightand yes its not weather proof i put all my boxes in heavy plastic bags Attached files Link to comment Share on other sites More sharing options...
Don Posted July 24, 2011 Share Posted July 24, 2011 If you are referring to your license for the LOR software, you can retrieve it here:http://lightorama.com/licenseRetrieval.html Link to comment Share on other sites More sharing options...
Dale J Posted July 24, 2011 Author Share Posted July 24, 2011 sorry i didn't look that close wrong DonThanks Don, yes i have and Ive got it already i just need to get it registered now,Those LOR folks are fantastic.these are the leds i got from you, thanks again all work good i have one red led out on the board that you had the jumper on, did it have a bad trace? Link to comment Share on other sites More sharing options...
Recommended Posts